TECHNICAL SPECIFICATIONS

• Great 21mm eccentric roto-orbital movement; allows for polishing capability in minimal time, with very high efficiency. Achieves professional polishing with deep color and shine.
• Powerful motor of 810w power. Up to 30% higher than the market average.
• Speed controller that is very easy to access, from 1500 rpm to 4800 rpm.
• Smooth start and stop, with a very progressive curve.
• Two-handed grip, with ergonomic rubber handle. Optionally, a side handle can be added (included).
• EXTREMELY easy to use, even for the most inexperienced. It is very difficult to create defects in the paint such as swirls, haze marks, etc., due to poor application.
• Machine recommended for polishing work (with gloss polish + soft finishing sponge), cutting polish, defect correction, paint correction after varnishing, etc.
• Speeds: 
  • Speed 1: very slow
  • Speed 2: for waxes (use black pad if applying any wax with the polisher)
  • Speed 3 and 4: For FullCarX Medium and High Cut polishes
  • Speed 5: For Gloss Finish
  • Speed 6: For professionals only. With high revolutions, it can heat the bodywork significantly, so care must be taken.

FREQUENTLY ASKED QUESTIONS

How to remove scratches from the bodywork?

If the scratches are superficial:

1. Clean, degrease, and decontaminate the bodywork (with ClayBar and ClayLube)
2. Apply High Cut Polish and Red Pad at speed 3 or 4
3. Apply Gloss Polish with Black Pad at speed 5

If the scratches are deeper:

1. Clean the bodywork
2. Sand (grit 2000 or 3000) over the lubricated surface (spray water beforehand)
3. Apply High Cut Polish and Red Pad at speed 3
4. Apply Medium Cut Polish and Yellow Pad at speed 4
5. Apply Gloss Polish with Black Pad at speed 5

How to remove holograms from the bodywork after polishing?

You should use the FULCLARX MANUAL POLISHING KIT which includes:

• FullCarX® GLOSS Polish 500 ml
• Black Applicator Sponge
• Gray Microfiber Applicator Sponge
• High-quality green microfiber cloth

BUY IT WITH...