CERAMIC POLISH KIT - Decontaminated, Complete Polishing, and Ceramic Treatment
€253.95
€228.56
Save 10%
Tax included
Ultimate kit for a perfect finish: Degreasing + Decontamination + Complete Polishing + Ceramic Treatment
Rating:
(0)
INCLUDE
- ROTARY-ORBITAL POLISHER 150cm plate and 21mm eccentricity
- High Cut Polishing
- Medium Cut Polishing
- Gloss Polishing
- Red Pad - High Cut
- Yellow Pad - Medium Cut
- Black Pad - Gloss
- Body Degreaser
- Iron Cleaner
- Clay Lube
- IPA (body preparation for polishing)
- 9H - Ceramic Treatment
- Washing Mitt
- Claybar
- Jumbo Drying Towel. Note: temporarily out of stock, replaced by MAXI microfiber
- Duo Polish or Cloud Microfiber (depending on availability)
STEP BY STEP
- Body Degreaser: Use the body degreaser with a mitt and bucket with water and spread the product over the entire surface to remove all types of waxes and grease residues. Dry with Jumbo Towel
- Iron Cleaner: Spray the surface with the iron decontaminant and remove the ferodo particles
- ClayLube: Apply the lubricant on the surface to be treated or on the Claybar for safe decontamination
- IPA: Apply the body prep both in the preliminary stages of polishing and in intermediate and final steps to remove excess polish. Remove excess polish with the Duo Polish cloth
- High Cut Polish: Abrasive, suitable for conventional single-layer paints and two-layer systems. We will apply a few drops on the Green Pad (edge) or Red (High Cut)
- Medium Cut Polish: Very progressive and elastic cut in its application that allows for a high gloss. We will apply a few drops of polish on the Yellow Pad.
- Gloss Polish: We will apply a few drops of polish on the Black Pad to leave a shiny and crystal-clear finish. At the end, apply IPA again to remove excess polish.
- 9H Ceramic Treatment: Apply the ceramic treatment with the accessories included in the product
BENEFITS
Degreased and Decontaminated
Polishing in 3 Steps
Ceramic treatment
FREQUENTLY ASKED QUESTIONS
Yes, we recommend washing, degreasing, and decontaminating the surface prior to the polishing phases. It is also highly recommended to apply the IPA before starting to polish to keep the surface intact and avoid possible scratches.
- 21mm rotary-orbital movement
- 810W motor
- Variable speed between 1500 and 4800 rpm
- Soft start and stop with a very progressive curve
- Ergonomic two-hand grip
- 6 speeds
Apply the product following the instructions inside the package, making soft cross passes. Below you can see a video on how to apply it correctly:
BUY IT WITH...
Previous
Next
RELATED PRODUCTS
Previous
Next
Customer Evaluation
CERAMIC POLISH KIT - Decontaminated, Complete Polishing, and Ceramic Treatment
€228.56
Tax included