INCLUDES

• FCX PRO ROTO-ORBITAL POLISHER
• High Cut Polish
• Medium Cut Polish
• Gloss Polish
• Red Pad - High
• Yellow Pad - Medium
• Black Pad - Gloss
• Body Degreaser
• Iron Cleaner
• ClayLube (Lubricant for Clay Bar)
• IPA (Body Prep for Polishing)
• Washing Mitt
• Clay Bar (Decontaminating Bar)
• Jumbo Drying Towel
• Duo Polish or Cloud Microfiber (according to availability)

STEP BY STEP

1. Body Degreaser: Use the body degreaser with a mitt and bucket with water, spreading the product over the entire surface to remove all types of waxes and grease residues. Dry the body with the Jumbo Towel
2. Iron Cleaner: Spray the product on the body and remove any adhered ferrous particles
3. ClayLube: Apply the lubricant on the surface to be treated or on the Clay Bar to achieve safe decontamination
4. IPA: Apply the body prep both in the earlier stages of polishing and in intermediate and final steps to remove excess polish
5. High Cut Polish: Abrasive, suitable for conventional single-layer paints and two-layer systems. Apply a few drops on the Green Pad (edge) or Red (High Cut). At the end of the phase, apply IPA and remove with Duo Polish Cloth
6. Medium Cut Polish: Very progressive and elastic cut in its application that allows for high gloss. Apply a few drops of polish on the Yellow Pad. At the end of the phase, apply IPA and remove with Duo Polish Cloth
7. Gloss Polish: Apply a few drops of polish on the Black Pad to achieve a shiny and crystal-clear finish. At the end of the phase, apply IPA and remove with Duo Polish Cloth

BENEFITS

Complete Polishing

Perfect Decontamination

Save Money

FREQUENTLY ASKED QUESTIONS

Should I always Degrease and Decontaminate the body?

Yes, to avoid possible scratches during polishing

Is it mandatory to apply all 3 phases in polishing?

It depends on the condition of the body.

If the body is in good condition and only has small scratches or swirls, polishing can be done in 2 steps. However, if the clear coat is very deteriorated, all 3 polishing phases should be applied.

What features does the polisher have?

• 21mm random orbital movement
• 810W Motor
• Speed adjustable between 1500 and 4800 rpm
• Soft start and stop with very progressive curve
• Ergonomic two-handed grip
• 6 speeds

BUY IT WITH...