INCLUDES

• High Cut Polish 500 ml
• Medium Cut Polish 500 ml
• Gloss Finish Polish 500 ml

STEP BY STEP

1. High Cut Polish: Abrasive, suitable for conventional single-layer paints and two-layer systems. We will apply a few drops on the Green Pad (edge) or Red (High Cut)
2. Medium Cut Polish: Very progressive and elastic in its application, allowing for a high gloss finish. We will apply a few drops of polish on the Yellow Pad.
3. Gloss Polish: We will apply a few drops of polish on the Black Pad to leave a shiny and crystal-clear finish.

BENEFITS

3-Phase Polishing

Extra Glossy

Saves Money

FREQUENTLY ASKED QUESTIONS

Is it mandatory to apply all 3 phases in a polish?

It depends on the condition of the bodywork.

If the bodywork is in good condition and only has minor scratches or swirls, polishing can be done in 2 steps. However, if the clear coat is very damaged, we must apply all 3 polishing phases.

Can I polish plastics?

We do not recommend polishing plastics.

Should I take any precautions before application?

Yes, we recommend washing, degreasing, and decontaminating the surface prior to the polishing phases.

How can I remove excess polish between phases?

We recommend using IPA between each of the polishing phases to remove polishing residues.

BUY IT WITH...