METALLIC BLACK - PACK WHEELS GLOSS
Rating:
(0)
€28.10
€25.29
Save 10%
Tax included
High-quality spray acrylic paint pack with coverage, designed for wheels and automotive parts. Suitable for indoor and outdoor use, with great resistance and color durability. Compatible with metal, plastic, wood, glass, etc.
INCLUDES
- x2 sprays 400ml Acrylic paint color Metallic Black matte
- x1 spray Primer acrylic 1K (Primer + filler)
- x1 spray Varnish Acrylic Gloss
- x1 Sandpaper 400 (subject to availability)
NOTE: For 4 wheels of up to 19 inches ONLY the front. If you want to do the inside you need 2x packs
STEP BY STEP
- Apply the primer spray 1K acrylic primer spray, which facilitates the proper adhesion of the acrylic paint. It is recommended to apply one or two coats as a primer. The surface must be clean and dry beforehand.
- If necessary, sanding for imperfections should be done after waiting 2 hours after applying the primer.
- Apply the acrylic paint of the selected color, allowing 5 minutes between coats and at a distance of about 30cm. It is important to cover the surface well in each application until achieving a smooth and even finish (approximately 2 or 3 coats).
- After 2 hours, apply the gloss acrylic varnish spray as a final coat. It is recommended to apply a couple of coats to achieve a shiny and scratch-resistant finish.
- If a sag occurs during application, it is advisable to let it dry and correct it in the subsequent layers.
TECHNICAL SPECIFICATIONS
- Touch dry time of 10 minutes
- Repainting possible after 10 minutes
- Hardens in 3 hours, scratch-resistant technology
- Complete drying in 24 hours
- Product life over 3 years
- Coverage approximately 2 m2 with 400ml in one coat
- Recommended thickness for maximum resistance 0.2mm
- Temperature resistance up to 90ºC
- Application temperature between 5-35ºC
- Apply in environments with humidity below 45%
FREQUENTLY ASKED QUESTIONS
You can paint the 4 wheels (up to 19 inches) only on the front side. If you want to paint it on both sides, you will need to purchase 2 packs.
It is recommended to apply 2 or 3 coats, although the exact number may vary depending on the color and the surface. Ideally, apply coats until achieving an even and complete coverage, without leaving translucent areas.
First, you should apply the gloss varnish 24 hours after painting the wheels. To achieve a fine and shiny finish, it is recommended to apply 3 layers of varnish (the first ones thinner and the last ones thicker). The last layer should be quite thick so that the varnish can stretch and remain smooth (taking care not to overload it).
If you have already applied the varnish and orange peel has formed, you should sand with 1000 grit sandpaper to open the pores and apply more layers on this surface.
BUY IT WITH...
Previous
Next
RELATED PRODUCTS
Previous
Next